The wireless remote had obtained IPX5 water proof certificate, sutiable for bathroom use.
Levels | Protection In | Testing Target | Details |
0 | No Protection | — | — |
1 | Water drop | No Neg. effect for vertically water drop | Testing time: 10 min, approx. 1mm rain drop per min. |
2 | Slop for 15° water drop | Slep from normal to 15°, No Neg. effect for vertically water drop | Testing time: 10 min, approx. 3mm rain drop per min |
3 | Spray | Spray 60° above the testing unit should do no neg effect | Testing time: 5 min, Water amount: 0.7 L with water pressure 80-100kPa per min. |
4 | Splash | Splash water on testing unit from any angle should do no neg. effect. | Testing time: 5min, Water amount: 10L for water preesure 80-100kPa per min |
5 | Low pressure water column | From spraying point(6.3mm)spray out water column from any angle on testing unit outer cover should do no neg effect. | Testing time: At least 3 min. Water amount: 12.5L with water pressure 30kPa per min and in distance of 3 meter. |
6 | High pressure water | From spraying point (12.5m) spray out from any angle should do no neg effect on the cover of test unit | Testing time: At least 3 min. Water amount 100L with water pressure 100kPa in distance for 3 meter |
7 | Place in water at most 1 meter | In specific condicion, including duration and water pressure, place in water at most 1 meter will not be damage | Testing time: 30 mins. Place in water at most 1 meter, measuring from the bottom of the testing unit, with 15cm distance to the top of the unit. |
8 | Place in water more than 1 meter | With specific condition, can be place under water for a long period of time. Usually the unit is sealed. For some unit it can be meant for puting in water for some time and not being damaged. | Testing time: Ongoing under water. Depth is depending on the manufacturer. |
Beside the wireless remote, you can use the main control board on the machine to operate all kinds of functions.